Logic3 WIS030 Manual Del Usuario página 3

setting of time/Date
There are two ways to set your Time:-
A. Auto sync the iPod/iPhone time :-
1. Press and Hold down the 'Clock' button with the iPod/iPhone docked on to the speaker.
2. Time from the iPod/iPhone will sync to your i-station sound Bar
B. Manual input:-
1. Press and hold the 'Clock'' button (Time will display 12h)
2. Using the 'Volume button' set the time format (12hr/24hr).
3. Press the 'Preset/set' button (Hour Unit will flash).
4. Using the 'Volume' buttons set the Hour.
5. Press the 'Preset/set' button (Minutes Unit will Flash)
6. Using the 'Volume' buttons set the Minutes
7. Press the 'Preset/set' and the settings will save automatically and the display will return to the Time display.
Note: In the setting mode if no buttons are pressed for 10seconds the display will return to the current time
display.
selecting a source (iPhone/iPod, radio or auX)
The i-station sound Bar works in conjunction with the downloaded App (logic3 i-station soundBar Wis030), which can
be downloaded via iTunes.
This application will allow you to select your required source on the speaker via the iPhone.
There are two ways to select your source:-
1. Using the i-station sound Bar
A. Press the 'stand By' button on the i-station sound Bar/Remote Control.
B. Press the 'source' button on the i-station sound Bar/Remote Control until you have selected the required source.
iPod FM AUX 1 AUX 2
4
2. Using Wis30 soundBar App
setting the radio
Only 10 Presets can be saved at any one time.
1. Un- tie the FM antenna cable and position the antenna as high up as possible.
2. Turn on the i-station by pressing the 'stand By' button.
3. select Radio by pressing the 'source' button.
4. Using the 'Tuning' buttons set the required radio frequency (Pressing the 'Tuning' button once will manually Tune the
radio, Press and Hold the 'Tuning' button will Auto search the radio)
5. Press and hold the 'Preset/set' button (Program number will then flash)
6. Using the 'Tuning' or 'Volume' buttons set the Program number you wish to save the radio station to.
or
7. Press the 'Preset/set' button to save the settings.
Note: In the setting mode if no buttons are pressed for 10 seconds the display will return to the current time display.
to recall a Preset radio station
The i-station sound Bar works in conjunction with the downloaded App (logic3 i-station soundBar Wis030), which can
be downloaded via iTunes.
This application will allow you to recall your radio presets on the speaker via the iPhone.
There are two ways to recall your radio stations:-
1. Using the i-station 30
A. Press the 'Preset/set' Button and the Program number will appear on the display
B. Pressing the 'Preset/set' on the i-station sound Bar or the 'scroll Up/Down' on
the Remote Control button again will toggle through the Preset stations
(P1, P2, P3, P4, P5, P6, P7, P8, P9, P10)
or
C. Once the frequency has been selected, the i-station sound Bar will be set to the program and the display will return to
the current time display.
Note: If no buttons are pressed for 10seconds the display will return to the current time display
5