Before The First Use; Using Your Juicer - Aigostar 8433325502096 Manual De Instrucciones

BEFORE THE FIRST USE

1. Please check whether all parts and accessories are complete
and free of damage.
2. Clean all removable parts according to the section CLEANING
AND MAINTENANCE.
3. Reassemble the parts as follows.
1) Put the bowl into the rotating axis of the motor base, make
sure the spout align with the groove of the motor base.
2) Fit the sieve onto the bowl.
3) Assemble the appropriate cone on the rotating axis. Choose
the appropriate cone according to the fruit size. Small fruit
can be squeeze on the smaller cone, while for the large size
fruit the two cones have to be used together, that is the large
cone put on the small cone.
4) Make sure the spout is on closing position (only lifting the
spout upwards). The juicer is ready for use.

USING YOUR JUICER

1. Wash and then halve the citrus fruit.
2. Plug the power cord into the outlet.
3. Halve the fruit, put the half fruit on the cone and press it lightly and
the motor start running. Then the extracted juice will flow into the
bowl through the sieve, the roughness flesh and pith will be
remained on the sieve.
Caution: Never exert excessive force when pressing the fruit to
prevent from blocking and damaging motor.
4. Once completing the squeezing, release the hand from the cone
4