Kohler K-2826 Guia De Instalacion página 4

2. Self-Rimming Installations
CAUTION: Risk of personal injury or product damage. Cast
iron lavatories are very heavy. Get help lifting the lavatory
into place.
Temporarily position the lavatory in the countertop cutout so the
"Kohler" logo is to the back. Verify proper fit and clearance.
Remove the lavatory from the countertop.
Install the faucet and drain according to the manufacturer's
instructions.
Carefully position the lavatory in the countertop cutout so the
"Kohler" logo is to the back. Verify proper fit and clearance.
Apply a thin, continuous bead of sealant around the lavatory
edges. Immediately wipe away any excess sealant.
Fill any voids between the lavatory and the cutout with sealant.
Verify that the lavatory had not moved out of position.
Allow the sealant to cure for at least 30 minutes before
proceeding.
Connect and tighten the trap to the drain, and complete the water
supply connections to the faucet according to the faucet
manufacturer's instructions.
Run water into the lavatory and check for leaks.
Clean up with a non-abrasive cleaner.
1053432-2-B
Sealant
4 Kohler Co.