Description Of The Control Panel And The Automatic Program - HappyCook SP4X Manual Del Usuario

Description of the control panel and the automatic program

« ON/OFF » button: after the appliance is plugged in, the buzzer will beep and the control panel
will flash to enter into standby status.
Press on the « ON/OFF » button then select one of the auto program to start the blending and/or
cooking of your dish. At the end of your program, the soup maker will produce continuous "beep"
sound, the "ON/OFF" and selected auto program buttons will flash. Press one time on the button
« ON/OFF » to enter standby mode (motor off, heating element off).
« Smooth soup » program: automatic cooking program for smooth soup.
Press on the « ON/OFF » button then press this button program to start the blending and cooking
of your dish. At the end of your program, the soup maker will produce continuous "beep" sound,
the "ON/OFF" and selected auto program buttons will flash. Press one time on the button
« ON/OFF » to enter standby mode (motor off, heating element off).
Operating mode: total working time of 21 minutes alternating between heating phase (max.
100°C) and blending phase.
Wash the inside of the jug and the blades
with a sponge damped with dishwashing
liquid then rinse it with clean water
before drying them with a clean cloth.
Clean the outer body with a dry clean
cloth.
Do not immerse the jug into water.
Do not put the jug into a dishwasher.
Warning: avoid water spillage on the
connector.
3
ENGLISH