Technical Specifications - Hughes & Kettner BASSFORCE XL Manual

TECHNICAL SPECIFICAT I O N S
PREAMP SECTION
Bass frequency: 70 Hz, +10/-10 dB, active
Mid frequency: 1 kHz, +6 / -6 dB, passive
Treble frequency: 15 kHz, +16/-10 dB, passive
I N P U T S
active +6 dB; 1 M ohms
passive -6 dB; 1 M ohms
FX Return -10 dB; 47 k ohms
O U T P U T S
FX Send: -10 dB; 220 ohms
Line Out: 0 dB; 1 kohm, balanced
POWER AMP
"Dynaclip" bipolar solid state power amp:
200 Watts (DYNACLIP) into
Slew rate 5.3 V/µ s
Frequency response 20 Hz - 20 kHz (-1dB/+ 0 dB)
Phones 500 mw into
Internal Speaker
200 Watts, 4 ohms, 15" Hughes & Kettner Custom
Dome Tweeter 16 watts, 4 ohms
4 ohms
4-600 ohms
GENERAL FEAT U R E S
Voltage: 230 V (for Europe)
117 V (for North America)
100 V (for Eastern Asia)
Max. power consumption:
Mains fuse: slo-blo 2000 mA (230 V-model)
slo-blo 4000 mA (117 V-model)
slo-blo 4000 mA (100 V-model)
Internal fuses: 2 x slo-blo 3150 mA
Dimensions, L x H x D: 555 x 560 x 428 mms
Weight: 28 kg., 61.6 lbs.
We reserve the right to modify specifications in response
to new technical developments.
355 VA (4 ohms)
HOME