Maintenance And Service - Bosch GIC 120 C Professional Manual Original

OBJ_BUCH-2385-004.book Page 15 Tuesday, November 7, 2017 9:09 AM
Taking Photos/Videos
Use button 8 to switch between photo or video mode. The
currently selected capture mode a is shown in the status
bar b.
Use button 6 to take a photo or to start/stop video capture in
the corresponding mode.
Gallery Mode/Settings Mode
Pressing button 4 assigns a different function to buttons 8, 7,
5 and 4 (according to the representation above them on the
display) (2nd level). Use these buttons according to the rep-
resentation on the display.
Briefly pressing button 4 opens the Gallery Mode. Press but-
ton 4 to view the image in full-screen mode and press button
6 to play a video.
Holding down button 4 opens the Settings Mode. The follow-
ing settings are possible:
– Colour rendering (red dot)/black-and-white rendering
(green dot) (h)
– Brightness of the display (i)
– Date/time (j)
– Auto-Off function: duration of inactivity of the inspection
camera after which it switches itself off (k)
– Lighting duration of the display (l)
– Storage occupancy/formatting of the micro SD card (m).
Status Bar
The status bar b is shown on the display for approx. 2 seconds
after every button press. It shows:
– the selected capture mode (a)
– the date and time
– the selected magnification (c)
– the selected brightness (d)
– the charging condition of the battery pack/batteries (e).
Transferring Images and Videos
Transferring images and videos is only possible when a micro
SD card 20 has been inserted.
The inspection camera can be connected to a computer using
a micro USB cable 19 in order to transfer images and videos.
A symbol on the display indicates that the inspection camera
is connected to a computer.
The inspection camera will be shown as an external drive on
the computer.
The battery pack of the inspection camera cannot be charged
via the connection 12.
Connecting a Micro USB Cable for Data Transfer
Open the upper cover 10 and insert the micro USB cable 19
into the connection 12 in the correct position.
After data transfer, remove the micro USB cable and close the
upper cover again.
Working Advice
Check the area that you want to inspect and pay particular at-
tention to obstructions or hazard areas.
Bend the camera cable 13 in such a manner that the camera
head can be easily inserted into the area subject to the inspec-
tion. Carefully guide the camera cable in.
Bosch Power Tools
Adjust the brightness of the illumination light 15 so that the
image can be seen well. For heavily reflecting objects, as an
example, less light will provide a better image.
When objects to be inspected are represented unsharp, re-
duce or increase the distance between camera head 14 and
object.
Recommendations for Optimal Handling of the
Battery Pack
Protect the battery pack against moisture and water.
Store the battery only within a temperature range between
–20 °C and 50 °C. As an example, do not leave the battery in
the car in summer.
A significantly reduced working period after charging indi-
cates that the battery pack is used and must be replaced.
Observe the notes for disposal.
Troubleshooting – Causes and Corrective
Measures
Cause
Error indication on display
Camera cable not
mounted.
Micro SD card not
inserted or not cor-
rectly inserted.

Maintenance and Service

Maintenance and Cleaning
Do not immerse the hand unit 1 into water or other fluids.
Keep the inspection camera clean at all times. Clean the
inspection camera and all auxiliary aids particularly thorough
after having worked in areas with substances that are hazard-
ous to one's health.
Wipe off debris using a moist and soft cloth. Do not use any
cleaning agents or solvents.
Especially clean the lens 16 of the camera regularly and pay
attention for any lint.
After-sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
In all correspondence and spare parts orders, please always
include the 10-digit article number given on the nameplate of
the product.
English | 15
Corrective Measure
Mount the camera
cable.
Insert the micro SD
card and slide it all the
way in.
1 609 92A 3Z0 | (7.11.17)