ARDES AR5E30A Folleto De Instrucciones página 5

For DC mode, the appliance shall be supplied by
the cable with car lighter plug supplied with the
appliance.
Make sure that the supply voltage correspond to
the voltage marked on the appliance (DC 12V).
If the power cable gets damaged, it has to be
replaced only at a service centre approved by the
manufacturer.
The appliance shall not be exposed to rain.
WArnIngs
ATTENTION : read this booklet carefully it contains important instructions for a safe
installation, use and maintenance.
Important instructions to be kept for future reference.
Keep handy the guarantee, receipt of payment and these instructions for future use and reference.
After removing the packaging, check the appliance for any signs of damage. In case of visible
damage, do not use it and contact a qualified technician.
Do not leave parts of the packaging with in the reach of children.
This appliance is not a children's toy: it is an electrical device and must be treated with the necessary
caution.
Before connecting the appliance, make sure that the power supply voltage matches the indication
on the data plate.
If the plug and socket are not compatible, the socket has to be replaced with a suitable type by skilled
persons. Do not use adapters or extensioncables which do not meet current safety standards or
that exceed the current carrying capacity limits.
When you don't use the appliance disconnect it from the power supply and assure that the interruptor
is off.
Do not tug on the power cable or on the appliance it self to remove the plug from the socket.
The use of any electrical appliance requires that a number of basic rulesare observed, namely:
- Never touch the appliance with wet or humid hands.
- Do not leave the appliance exposed to weathering (rain, sunlight).
- Do not subject it to rough handling.
In case of a breakdown or malfunctioning of the appliance, disconnect it at once. Do not attempt to
repair it, but take it to a service centre approved by the manufacturer.
If you decide you do not want to use this appliance any longer, disable it by cutting the power cable
- of course, after disconnecting it from the socket.
The power cable should be extended to its full lenght to avoid overheating.
For safety reasons, the appliance should never be opened.
The appliance has been designed and manufactured to operate as a Portable Mini-fridge. Any other
use is considered inappropriate.
During use, rest the appliance on a flat surface.
Do not connect at the same time power cables.
Water may form inside the compartment due to extensive operation of the appliance. This is normal,
as it concerns the humidity of the air which condenses when the temperature drops.
In this case, dry the compartment thoroughly.
InstructIons for use
The cooler is not suitable for continuous work. Ice could form on the aluminium cooling plate. You
are advised to switch off the appliance after 6 days consecutive work. The cooler box can be re-
operated after 2 hours.
Keep the casing dry because condensate could form.
If the cooler is not used, keep the connection cables in the covered compartment.
5