How to Use
This appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the
iron.
Note: Use ordinary tap water for ironing. Do not use water processed through
a home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
A
B
C
IRONING WITH STEAM
Surge of Steam
Use to remove stubborn creases.
D
E
14
FILLING WATER TANK
1. Place your thumb at the bottom center of the water-fill
cover and push up to open (A).
2. Tilt the iron and using a clean measuring cup, pour
water into opening until the water reaches the MAX level
mark on the water tank (B). Do not overfill.
3. After filling, close the water-fill cover.
4. Plug in the iron. The temperature-ready indicator light
comes on (C).
1. With the water tank filled to the MAX mark, turn the
fabric-select dial to appropriate setting (between 4 and
6) for your fabric (D). See fabric guide on the heel rest
and read garment's label to help you determine fabric
type.
2. Move the dry/steam selector to the desired steam
(E).
level
10