Care And Cleaning - Black+Decker POWER PRO AS600 Manual De Instrucciones

Care and Cleaning

This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING OUTSIDE SURFACES
1. Make sure iron is unplugged and has cooled completely. Wipe the soleplate
and outer surfaces with a soft cloth dampened with water add mild
household detergent. Never use abrasives, heavy-duty cleansers, vinegar or
scouring pads that may scratch or discolor the iron.
2. After cleaning, steam iron over an old cloth to remove any residue from the
steam vents.
AUTO CLEAN ® System
To keep the steam vents free of any buildup, about once a month follow these
instructions.
1. Fill the water tank well below the MAX line. Plug in the iron.
2. Select fabric temperature setting 6 and stand the iron on its heel rest.
3. Unplug the iron and hold over a sink with the soleplate facing down.
K
STORING YOUR IRON
1. Unplug the iron and allow it to cool.
2. Set dry/steam selector to
3. Store vertically on its heel to prevent water leaking from the soleplate.
16
4. Press and hold the AUTO CLEAN ® button. Be careful,
as hot water and steam will come out of the steam
vents (K). Continue to hold the AUTO CLEAN ® button
until all the water has emptied. If necessary, rock iron
side to side and front to back.
5. When finished, release the button, stand the iron on its
heel rest and plug it in. Heat for about 2 minutes to dry
out any remaining water.
.