Costco 196-924-2CP-V4-IN Instrucciones De Montaje Y Uso página 9

Assembly (continued)
8
Attaching long side panels to corner posts and short side panels
M6 × 35 M6 × 20
BB 8 PCS AA 16 PCS
□
Carry the partially assembled bed frame inside of the
assembled pergola frame.
□
Attach long side panels to corner posts with washers (EE)
and bolts (BB) using hex wrench (HH).
□
At each inside corner attach one support plate (J)
to both side panels (G) and (H) with washers (EE) and
bolts (AA) using wrench (HH).
M6 × 20
AA 8 PCS EE 8 PCS
□
Attach T-bars (I) to the insides of both long side panels (G)
with washers (EE) and bolts (AA) using hex wrench (HH).
Important : First, screw two bolts (AA) through one end of
the T-bar (I) into one long side panel (G) about 1/3 deep.
Next, screw another two bolts (AA) through the other end of
the T-bar (I) into the other long side panel (G) about 1/3
deep.
When all the bolts are in position, fully tighten all of them.
S4
EE 24 PCS HH
S4
HH
BB EE
Step 8.1
EE AA
G
Step 8.3
9
AA
EE
J
Step 8.2
I
G
I