Care And Maintenance; Troubleshooting; Corrective Action; Warranty - Kobalt KJB 124B-03 Manual Del Usuario

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Before cleaning or performing any maintenance, remove the battery from the tool. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Cleaning
Always use only a soft, dry cloth to clean your blower; never use detergent or alcohol.
Storage
Clean all foreign material from the air inlets of the blower.
Store indoors in a place that is inaccessible to children. Keep away from corrosive agents,
such as garden chemicals and de-icing salts.

TROUBLESHOOTING

WARNING
• Turn the switch to the "OFF" position and remove battery from the tool before performing
troubleshooting procedures.
PROBLEM
Tool does not work.
The air velocity
decreases significantly.

WARRANTY

For 5 years from the date of purchase, this product is warranted for the original purchaser to
be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
1. Low battery capacity.
2. The battery pack or
blower is too hot.
The air inlet is blocked by
debris.

CORRECTIVE ACTION

1. Charge the battery pack.
2. Turn off the blower and allow the
blower and battery pack to cool.
Remove the battery pack, clear the
debris.
11
Printed in China