Maintenance, Care And Cleaning; Changing The Sewing Light; Replacing The Needle - Medion MD 17187 Manual De Instrucciones

Ocultar thumbs Ver también para MD 17187:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

7. Maintenance, care and cleaning

ATTENTION!
Risk of injury!
Unintentional actuation of the foot switch can start up the
machine and lead to a risk of injury.
 Before carrying out any maintenance, cleaning or replace-
ment work, always turn off and unplug the machine.

7.1. Changing the sewing light

 You switch the sewing light on and off using the main switch (18).
 To open the front flap, use the supplied screwdriver to undo the screw in
the middle of the front cover (14).
 Now pull the front flap forwards.
 You can now change the light bulb by unscrewing it anticlockwise.
 Push the front flap back on again until it clicks into place and secure it with
the screw.
NOTICE
The maximum permitted light bulb power rating is 15W.
Light bulbs are available from specialist retailers.

7.2. Replacing the needle

 Turn the hand wheel (21) towards you until the needle (26) has reached its
top position.
 Loosen the needle clamp screw (24) by turning it towards you with the
screwdriver.
 Remove the needle (26) from the needle holder (32).
 Insert a new needle (26) with the flat side facing backwards. Push the nee-
dle (26) upwards until it can go no further.
 Tighten the needle clamp screw (24) again.
NOTICE
Needles are available from specialist retailers.
For information on types and thickness, please see the table for fabric, thread
and needle data on Page 78.
Maintenance, care and cleaning
ES
EN
DE
71 of 122

Hide quick links:

Publicidad

Tabla de contenido
loading

Tabla de contenido