Installing the turntable
Connector
(under the turntable)
Glass turntable
Turntable shaft
A� Never place the glass tray upside down� Make sure that the
rotation of the glass tray is not obstructed�
B� Always use the glass tray and the guide ring during cooking�
C� All foods and food containers must be placed on the glass tray
for cooking�
GB
D� If the glass tray or the guide ring cracks or breaks, contact the
nearest authorised repair centre�
• Internal compartment: Remove all protective films present on
the surfaces of the internal compartment in the microwave
oven�
• Do not remove the light brown Mica plate which is located in
the oven's internal compartment, because it serves to protect
the magnetron�
172
Roller ring
Installation
1� Choose a horizontal surface with sufficient clear space for the
air inlets and/or outlets�
30cm
0cm
20cm
20cm
Min 85cm
empty space of 30 cm minimum above the oven and 20 cm
between the oven and each wall�
(3) Do not remove the feet on the base of the microwave oven�
(4) Obstructing the air inlets and/or outlets may damage the
oven�
(5) Make sure the microwave is as far away as possible from
television sets and radios� Using a microwave oven can cause
interference liable to disturb the reception on radios or
televisions�
2� Plug your oven into a standard household electrical outlet�
Ensure that the voltage and frequency of the power supply are
identical to those stated on the appliance data plate�
(1) The minimum
installation height
is 85 cm�
(2) The back of the
appliance must
be placed against
a wall� Leave an
GB
173