Ordering Replacement Parts - Axis NITRIS Manual De Instrucciones

the side of the Foil Frame and the Foil Frame base. (fig. 2) Inverting the
Foil Base will allow the Foil Frame to drop out. (fig. 3)
3. Position the replacement Outer Foils over the cutters. Be careful not
to damage the foils. Gently slide the head assembly down until it seats
firmly into place.
To Replace the Inner Cutters
(Please refer to the "Ordering Replacement Parts"
section)
NOTE: Always replace foil screens when replacing
the inner cutters.
1. Remove the foil screen assembly by pressing
the release buttons on both sides of the shaver
and lifting it off. (fig. 1)
2. Remove the inner cutters by grasping and
Axis Nitris and Axis Fuel |2| english
Fig. 3
Fig. 3
lifting upwards. (fig. 2)
3. Be sure to hold the replacement cutters firmly as you carefully insert
them into the inner cutter mounts.
4. Push the replacement cutters down firmly until they lock into place.
5. Replace the foil screen assembly and gently slide it down until you
hear it lock into place.
Fig. 1
Fig. 1
1

Ordering replacement parts

Please contact Axis/BPI at 1-877-263-9500 to order replacement
parts for your Axis shaver. Please refer to the following part number.
Part number: AN-2
2 Fig. 2
Description: Replacement Outer Foil Frame and Inner Cutters for
Model AX-3335/AX-3331
Fig. 2
Axis Nitris and Axis Fuel |2| english