Shaving Tips - Axis NITRIS Manual De Instrucciones

SHAVING TIPS

Keep the unit clean and dry at all times.
Wash and dry your skin thoroughly prior to shaving.
In order to achieve the closest shave and avoid unnecessary wear on
the foils, be sure that both foils contact the skin simultaneously. Do not
hold the shaver at an angle where only one foil contacts the skin – this
will cause distortion of the foil and may result in skin irritation.
Stretch your skin with your free hand while using short, circular strokes.
This will make the hairs stand out from your face and allow the cutting
heads to reach them more easily. Shave against the grain for optimum
results.
To facilitate cutting and avoid foil wear, do not apply the shaver to your
skin with high pressure.
The normal replacement period for the foil screens is about 6 months.
Axis Nitris and Axis Fuel |12| english
In order to maintain shaving performance and comfort, replace the
cutters at least once a year. To order replacement parts, please refer to
the "Ordering Replacement Parts" section of this manual.
Using this Shaver
1. Remove the protective plastic headguard. (Fig. 1)
2. Ensure that the foil screens and inner cutters are not damaged.
Replace damaged parts before using. To obtain replacement parts,
refer to the "Ordering Replacement Parts" section of this manual.
3. To turn the shaver on, depress
the lock button and slide the on/off
switch up to the "on" position. (fig. 2)
Axis Nitris and Axis Fuel |13| english
1 2
fig.1