Before First Use; Operation; Troubleshooting - Klarstein 10031468 Manual Del Usuario

BEFORE FIRST USE

• Clean the appliance, and be thorough, especially in the interior (see „Cleaning
and Care").
• In case the interior accessories are not correctly placed, rearrange them as
described in chapter „Product Overview".

OPERATION

1 Clean the refrigerator thoroughly. Wipe the outside with a soft dry cloth.
2 Clean the interior with a clean moist cloth.
3 Insert the power supply cord into the socket.
4 Tum the thermostat dial to „5" or „low".
5 Close the door and let the refrigerator and operate it emty for 1-2 hours, before
you store any food inside.

TROUBLESHOOTING

Problem
Appliance does not work.
The food is too warm.
Possible cause
Mains plug is not plugged in
or is loose
Fuse has blown or is defective
Temperature is not properly
adjusted.
Door was open for an
extended period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Solution
Insert mains plug.
Check fuse, replace if
necessary.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the installation
location section.
EN
13