Chauvet DJ 6SPOT RGBW Guía De Referencia Rápida página 3

AC Power
This product has an auto-ranging power supply that works with an input voltage range of 100 to 240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
Power Linking
For the maximum number of 6SPOT RGBW products that you can power link at each voltage, see the User Manual or the
sticker on the product.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
Mounting
Before mounting this product, read the
Mounting Diagram
Mounting Clamp (x2)
(such as CLP-15 from Chauvet)
Mounting Bracket
(x2)
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> Navigates upwards through the menu list and increases the numeric value when in a function
<DOWN> Navigates downwards through the menu list and decreases the numeric value when in a function
<ENTER> Enables the currently displayed menu or sets the currently selected value into the selected function
6SPOT RGBW QRG Rev. 1
QUICK REFERENCE GUIDE
Safety Notes.
Safety Cable
(such as CH-05
from Chauvet)
Alternative Mounting Point
Tripod Mounting Point
(x2)
Bracket Adjustment Knob
EN
(x2)
2