Location Of Controls - Sunstech PXR3W Manual De Instrucciones

LOCATION OF CONTROLS

1) Dust Cover
2) Radio Band Selector
3) Loud speaker
4) USB Socket
5) Function knob
6) FM Stereo LED Indicator
7) Repeat/Random button
8) Record Button
/
9) Skip Up Down
10) Play/Pause/Stop
11) Folder Up Button
12) Record LED indicator
13) Play LED indicator
14) Repeat/Random indicator
15) SD/MMC Card Slot
16) Power On/Off-Volume knob
17) Power LED indicator
18) Tuning Knob
19) Spindle Adaptor
20) Turntable Speed Selector
21) Pick-Up Holder
22) Auto Stop On/Off Switch
23) Line Out Socket
24) 3.5mm Aux-In Jack
25) FM Wire Antenna
26) AC Power Cord
Caution:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in
hazardous radiation exposure.
This unit should not be adjusted or repaired by anyone except qualified service personnel.
Precautions for use
Installation
•
Unpack all parts and remove protective material.
•
Do not connect the unit to the mains before checking the mains voltage and before all other connections
have been made.
•
Do not cover any vents and make sure that there is a space of several centimeters around the unit for
ventilation.
Connection
1. Connect the Power Cord (26) to AC outlet.
2. Turn the Power On/Off Knob (16) clockwise until Power LED Indicator (17) light up. It's mean the power
supply is normal. Now your system is ready to play music.
Listening to radio
Manual tuning
1. Turn on the Power (16) and select Function knob (5) to "Tuner" position.
2. Select the desired band by Radio Band Selector(2)
3. Tune to the required station by turning the Tuning Knob (18).
4. Adjust the Volume Knob (16) to desired volume level.
FM & FM-stereo reception
Set the Radio Band Selector (2) at "FM" position, program are received in Mono mode. In particular when
stereo signal are weak. It is preferable to receive the program in Mono.
Set the Radio Band Selector (2) at FM-ST" position for receiving stereo programs. The FM-Stereo LED
Indicator (6) will light up to show FM Stereo program is receiving.
Button
Button
3