Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
B) Aux encoding
1) Connect the unit to other device by connecting the Aux in jack (24)
2) Set the Function knob (5) to "Phono/Aux" made and then press " Rec" Button(8).
3)
The Record LED indicator (12) will flash few second, then light up. Now the system was ready to encoding.
4)
Start playback your external device to recording to USB or SD.
5)
After finish of recording, press the " Rec" Button(8)again during recording mode.
C) File copy from USB to SD or reversal
The system allows to copy the files from the USB source to SD/MMC card by pressing the " record " button (8) :-
i) copying 1 track (assume copy from SD card to USB mode)
1) Perform normal playback of the track at SD/MMC card you want to copy,
2) Press " record " button (8) during the playback of the desire track, and the Record LED (12) indicator will light
up. Copying is performing now.
3) After copying is completed, unit will stop playback automatically.
ii) copying all tracks (assume copy from SD card to USB mode)
1.
Select " SD " mode by Function knob (5) and then insert the SD/MMC card you want to copy.
2.
Insert the USB driver and reserve enough memory size for recording
3.
After reading of card information is completed, press the " record " button (8) and the Record LED (12)
indicator will light up. Copying is performing now.
4.
After copying is completed, unit will stop automatically.
D) Track separation (by remote handset)
You can divide the recording music from Phono to USB/SD track by track during encoding. Every time when
press the "
" (Track Separation )Button once at remote handset during encoding from Phono/Aux to
USB/SD, the system will generate a new track and continue the Record LED indicator (12) will flashing one time.
It mean the unit is creating a new track successfully.
Removing of USB / memory card
To remove the USB/Memory Card, turn off the power or switch the function mode to either Phono or Tuner first.
For USB port -- unplug it by pulling out the USB socket directly. For Memory Card –pull out the SD/MMC card
straightly without bending
Line out connection
You can connect the system to your whole Hi-Fi system by connecting the Line out Socket (23) to the auxiliary
input socket with a RCA cable(not included).
.
6
Publicidad
Tabla de contenido
