Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Play / Pause / Stop mode
1.
To interrupt, press the "Play/Pause/Stop button (10) once, the Play LED indicator (13) will be flashing. Press
again to resume normal playback.
2.
If press and hold the "Play/Pause/Stop button (10) for two seconds during playback mode. The system will
go to stop mode.
3.
To start playback again, press the "Play/Pause/Stop" button (10) to start playback, the first track will start
playback and the Play LED indicator (13) will light up.
Skip/Search mode (skip/search up
2.
During play or pause mode, if "Skip Up" Button (9) is pressed. It will go to next track and then remain the play
or pause mode.
3.
During play or pause mode, if "Skip Down" Button (9) is pressed. It will go back to the beginning of the track
and remain the play or pause mode.
4.
After step 2, press "Skip Down" Button (9) again will go to the previous track and remain the play or pause
mode.
5.
If press and hold the "Skip Up/Down" button (9) during playback, the playing track will go fast forward or
backward until the button being released.
Folder up control(on remote control only)
1.
Press "Folder Up/down" Button, the system will go to play next/previous folder
Remark
-
The system can detect and read the file under MP3 format only though the USB port or SD Card slot.
-
If connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format,
some MP3 player may not be able to play via the USB socket. This is not a malfunction of the system.
MP3 track format requirement:-
- MP3 bit rate : 32 KBPS~256 KBPS.
Repeat/random mode
Press the Repeat/Random Button (7) before or during playback, a single track, single folder or all the tracks can
be played in different mode ass follow :
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
REPEAT SINGLE FOLDER
RANDOM MODE
OFF MODE
Repeat play
You can listen the desired track, folder or all tracks repeatedly by this function.
Random play
You can listen all the tracks in a random order by this function.
Encoding of Phono into MP3 file
The system is able to encode the Phono to MP3 format and recording at memory media with USB connecting
port or SD/MMC Card (support maximum up to 2GB memory size).
A) Phono encoding
1)
Set the Function knob (5) to "Phono/Aux" made and then press " Rec" Button(8).
2)
The Record LED indicator (12) will flash few second, then light up. Now the system was ready to encoding.
3)
Start playback at Phono of the track which you want to recording to USB or SD.
4)
After finish of recording, press the " Rec" Button (8) again during recording mode.
REMARK:-
-
The recording speed is 1:1 and according to the actual playing time of the record.
-
The system will create a "AUDIO" folder and then store the encoding track in it.
-
The recording format is preset at – MP3 bit rate : 128 KBPS, sampling rate : 44.1kHz.
-
To interrupt the recording, press the " Rec " Button(14)again during recording mode.
-
If both storage media(USB and SD) were inserted to the unit, system will default record to USB media.
/ skip/search down
REP/RAN
LED INDICATOR
STATUS
FLASH IN RED COLOR
LIGHT UP IN RED COLOR
FLASH IN GREEN COLOR
LIGHT UP IN GREEN COLOR
-----------------
)
5
Publicidad
Tabla de contenido
