Troubleshooting - JVC KD-S25 Manual De Instrucciones

Receptor con cd
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptoms
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be
skipped.
• Disc can neither be played back nor ejected. • Unlock the disc (see page 9).
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
• "PLEASE" and "EJECT" appear alternately
on the display.
• Disc cannot be played back.
• Noise is generated.
• A longer readout time is required
("READING" keeps flashing on the display).
Remedies/Causes
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 3).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.
• Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
Do not use too many hierarchical levels and folders.
Continued on the next page
REFERENCES
29

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido