Rio RF-Polar Manual Del Usario página 11

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Remove all packaging from the unit. Carefully plug
1
the mains adapter into the back of the console and
into your power supply.
Using the spatula, apply a thin layer of RF-Polar
2
Treatment Gel to the entire surface of your chosen
'Treatment Zone'.
RF-Polar
INS TRU C TIO NS FOR US E
3
4
8
To turn the unit ON, press the ON/OFF BUTTON.
ONE BLUE LIGHT will illuminate on the console,
and a SMALL BLUE LIGHT will appear on the wand.
The unit is now ready for use on the LOWEST HEAT
LEVEL. Heating will only occur when the unit is in
contact with the skin.
NOTE: When in contact with the skin it may
take 30–40 seconds to notice the full RF
heating effect.
You will need to work across your chosen
'Treatment Zone' methodically using a grid system.
Work in an area no larger than the size of your
palm at any one time.
IMPORTANT: Wand MUST be kept moving at
ALL times to avoid skin burns.

Publicidad

Tabla de contenido
loading

Tabla de contenido