Care & Maintenance - Rio RF-Polar Manual Del Usario

C A RE & MAIN TEN A N CE
Do NOT use solvents or detergents.
ensure unit works to specification. Pay particular attention to
the Heat Sensor and metal Contacts to ensure all residual
Treatment Gel is removed.
parts inside the unit.
use immediately and call our customer careline.
TRO U B L E SH OO TI NG
The wand feels too hot
The wand does not feel very hot even on the highest 'Heat Level'
move the wand as slow as possible without totally stopping
movement.
I cannot feel any heating effect
heating will only occur when all four metal contacts are
touching the skin. It may take 30-40 seconds to notice the full
RF heating effect.
Selected 'Heat Level' is being reached too quickly
(less than a minute before wand and console lights flash)
Selected 'Heat Level' is being reached too slowly
(more than 2 minutes before wand and console lights flash)
11
RF-Polar
™