User Safety - Stanley STHT1-77366 Manual De Instrucciones

GB
Safety, Maintenance, and Warranty
Contents

• User Safety

• Battery Safety
• Declaration of Conformity
• Maintenance and Care
• Warranty
User Safety
WARNING:
To reduce the risk of injury read all safety and operating
instructions before using this product.
CAUTION:
While the laser tool is in operation, be careful not to expose
your eyes to the emitting laser lens. Exposure to a laser beam
for an extended time may be hazardous to your eyes.
CAUTION:
This instrument emits a non-visible laser beam. The laser
beam emitted is Laser Class 1 per IEC 60825-1 and complies
with 21 CFR 1040.10 and 1040.11 except for deviations
pursuant to Laser Notice No. 50, dated June 24, 2007.
CAUTION:
Hazardous Radiation. Use of controls or adjustments or
perfor mance of procedures other than those specified herein
may result in hazardous radiation exposure.
Retain all sections of the manual for future reference.
WARNING:
The following label samples are placed on your laser tool
to inform of the laser class for your convenience and safety.
Please reference the Product Manual for the specifics on a
particular product model.
2
IEC60825-1: 2014
(3rd Edition)
1
DO NOT remove any warning label(s) on the housing.
This instrument must only be used for tasks as outlined in the
Product Manual.
ALWAYS make sure that any bystanders in the vicinity of
use are made aware of the dangers of looking directly into the
laser beam.
DO NOT use in combination with other optical
instruments. Do not modify the laser tool, make
adjustments or use in other applications than those
described in the Product Manual.
DO NOT look into the beam lens with optical aids, such as
magnifiers, binoculars or telescopes.
DO NOT stare into the laser beam lens.
DO NOT operate the laser tool if damaged or broken.
DO NOT direct the laser tool at other persons.
DO NOT set the instrument at eye level whenever possible.
ALWAYS turn the laser tool OFF when not in use. Leaving the laser
tool ON increases the risk of someone inadvertently staring into
the laser beam.
DO NOT operate the laser tool in combustible areas such as in the
presence of flammable liquids, gases or dust.
DO NOT disassemble the laser tool. There are no user serviceable
parts inside. Disassembling the laser will void all warranties on the
product. Do not modify the product in any way. Modifying the laser
tool may result in hazardous laser radiation exposure.
DO NOT use this instrument in areas where a risk of explosion is
present.