Metra 98-8999 Instrucciones De Instalación página 3

Volkswagen
1. Snap the VW trim plate onto the
front of the pocket. (Figure A)
2. Secure the VW brackets to the
pocket using the (6) #6 x ¼" "flat
head" screws provided. (Figure A)
3. Pull out on the plastic tray
separating the dash cavity, and
then remove the tray. Position the
pocket so that each bracket is
configured with (2) screws towards
the top, and (1) screw towards the
bottom. Slide the pocket into the
dash opening until the side clips
engage. (Figure B)
(Figure A)
(Figure B)
98-8999
3
Notes