Getting Started; Installing The Base - Orbit baby G3 Manual Del Usuario

22 -
Instruction Manual - Car Seat + Isofix Base

Getting Started

Give priority to rear seat positions. DO NOT place your child seat on any seat
•
position which has an airbag. DEATH OR SERIOUS INJURY can occur.
The car seat is certified for group 0 + Rearward Facing use only and secured to the
•
car seat base REAR-FACING up to 13kg. DO NOT attempt to install the car seat
WITHOUT the car seat base.
DO NOT USE the car seat base without the support leg.
•
DO NOT use vehicle seat belt system to secure the car seat base.
•
The car seat base must be secured at all times, even when not occupied.
•


Installing the base

□ Fit the support leg Ⓓ by depressing the snap buttons and inserting it into the
openings in the car seat base until you hear a CLICK on each side.
□ Position the car seat base on the vehicle seat and guide the ISOFIX connectors Ⓖ
into the ISOFIX anchorages in your vehicle until you hear a CLICK on each side.
Please refer to your vehicle manual if you have trouble locating the anchorages.
CHECK that BOTH ISOFIX indicator windows Ⓘ are green.
CHECK that the rebound bar Ⓐ is firmly pressing against the vehicle seat back.
⚠ WARNING ⚠
Death or Serious Injury Can Occur
Group 0 +