□ If the rebound bar is not firmly pressed against the vehicle seat back or if you cannot
attach the ISOFIX connectors onto the ISOFIX anchorages, twist the rebound knob
Ⓒ anti-clockwise and push/pull on the rebound bar handle Ⓑ until it CLICKS into the
next numbered position. Repeat until you have a secure installation.
□ Adjust the support leg by twisting the support leg knob Ⓔ anti-clockwise. While
holding the support leg knob, extend the support leg until it reaches the vehicle floor
and CLICKS into place on each side. Make sure the support leg is at the highest-
numbered position possible in which the car seat base is still sitting flat on the
vehicle seat.
Securing Your Child
Failure to properly position and adjust the shoulder straps to your child's size
increases the risk of serious injury or death in the event of an accident.
Adjusting and setting the harness
□ To loosen shoulder straps Ⓡ, press down on the adjuster strap lock Ⓨ and pull on
both shoulder straps. The adjuster strap lock is located under the upholstery Ⓩ
opening at the front of the car seat.
Instruction Manual - Car Seat + Isofix Base
⚠ WARNING ⚠
Death or Serious Injury Can Occur
- 23
Group 0 +