Installation; Wiring Diagram - Bticino L4561N Instrucciones De Empleo

L4561N

2 INSTALLATION

2.1

WIRING DIAGRAM

Install the cable with IR transmitter, applying the adhesive part of the transmitter close (max 1 cm) to
the source IR receiver (do not connect the transmitter above the IR receiver). The maximum distance
between the device and the source must be 1 m.
Adhesive IR
transmitter
Stereo source IR
detector
Please note: do not increase the cable length with an IR transmitter. If you use the Hi-fi system
headphone output, mind the level of the volume.
2 m long BUS cable
(supplied)
1.8 m long cable with IR
transmitter(supplied)
7 8
5 6
Sound system
BUS Terminals
5 and 6
Stereo control
L4561N
RCA/RCA cable
(supplied)
30