auna IR 130 Manual Del Usuario página 21

• DNS
The DNS is set <Dynamic> by default. Select to change <Fixed> DNS according to your network con-
dition.
WIFI Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between different coun-
tries. Therefore it is necessary to choose the Wi-Fi channels to ensure the Wi-Fi performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the country
you are staying from the list to get the correct channel.
The default country is set <Europe/United Kingdom>, press <Enter> on the Remote controller or push the
<Dial> to edit the country selection.
Date and Time: You can set Date & Time manually, choose the date and time format under this option.
Daylight saving setting is available.
If you want the time to be synchronized with the network time, choose <Use Network Time> from the menu.
If you choose to use Network time, the manual setting of Date and Time will be disabled.
Language: English & German are available.
Local Radio: This is to set the country of <Local Radio> that you want to access when you select <Local
Radio>. When you press the <Local> on the remote controller or choose <Local Radio> under "Skytune", it
will give one-touch access the radio stations in the country that you have selected on this setting.
The <Local Radio> is set in <Europe/United Kingdom> by default. Select the <Europe/United Kingdom>
and press <Enter> to change the country you want.
Playback Setup: This is to set the mode of playback under UPnP streaming: Repeat All, Repeat Once or
Shuffle.
DLNA Setup: Our radio supports streaming from DLNA devices and you can rename your radio for easy
recognition by the DLNA servers.
Resume when Power on: You can enable this function so that the radio will connect to the last listened
station automatically when the radio is power on. This function is off by default.
Dimmer: You can set the display backlight level as you prefer.
There are two settings available: Mode and Level
Mode: Normal or Power Saving
Normal – the display will stay with the same level of brightness all the time without dim down.
21