Ocultar thumbs Ver también para CS 50:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
Coin counting
1
Switch on machine and wait until the self-test is complete and 0.00 appears in the display.
2
Feed the coins into the coin funnel.
3
Press the START / STOP key to start the counting process.
4
Press the START / STOP key again to stop the counting process. The machine automatically switches
itself off after 20 seconds without coin infeed. The sum total in Euro is shown in the display.
5
In order to view the number of individual coin types, press the Report key.
6
Use the C key to return to the counting result.
7
In order to continue with the counting process, feed in more coins and press the START / STOP key.
8
The machine stops automatically if a coin container is full.
9
In order to start a new count, empty the coin container and reset the counter to 0.00 using the
C key.
Batch mode
When the Set key is pressed, the preset number for the individual coin types is displayed.
Default settings:
€ 2
80
€ 1
80
€ 0,50
80
€ 0,20
110
Use the +/- keys to increase or decre-
ase the respective preset numbers in
steps of 1. The Bat key can be used to
change the respective preset quanti-
ty in larger steps. If one of the preset
Troubleshooting
Should a coin get stuck in a coin duct,
switch off the machine. Pull the po-
wer plug and remove the remaining

Error messages

The following error messages could appear on the display following the self-test after the machine
is switched on.
EC
E0
E1 – E8
€ 0,10
€ 0,05
€ 0,02
€ 0,01
quantities is attained during a counting process, the machi-
ne stops automatically and shows which coin type is affec-
ted and how many coins are situated in the respective tray.
Remove the coins from the affected tray and continue with
the counting process by pressing the START / STOP key.
coins from the machine. Remove the stuck coins by hand or
with another suitable object by reaching into the coin duct
from below.
Rotary disc error / no rotation
Coin recognition error
Sensor error for the respective slot number counted from the right.
110
110
150
150
7

Publicidad

Tabla de contenido
loading

Tabla de contenido