Service; Specific Safety Information; Infrared Thermometer Safety; Description, Specifications And Standard Equipment Description - RIDGID micro IR-200 Manual De Instrucciones

Ocultar thumbs Ver también para micro IR-200:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

micro IR-200 Non-Contact Infrared Thermometer
for one piece of equipment may become hazardous when used
with other equipment.
• Keep handles dry and clean; free from oil and grease. Allows
for better control of the equipment.

Service

• Have your equipment serviced by a qualified repair person
using on ly identical replacement parts. This will ensure that
the safety of the tool is maintained.

Specific Safety Information

This section contains important safety information that is
specific to this tool.
Read these precautions carefully before using the RIDGID
micro IR-200 Non-Contact Infrared Thermometer to reduce the
risk of eye injury or other serious personal injury.
SAVE THESE INSTRUCTIONS!
Keep this manual with the tool for use by the operator.

Infrared Thermometer Safety

• Do not look into the laser beam. Looking into the laser beam
may be hazardous to the eyes. Do not look at the laser beam with
optical aids (such as binoculars or telescopes).
• Do not direct the laser beam towards other people. Make
sure the laser is aimed above or below eye level. Laser beams
may be hazardous to the eyes.
• Do not use this device for personal inspection or medical
use in any way. This is not a medical device. This could cause
personal injury.
4
WARNING
• Take appropriate precautions when working near electrical,
moving or hot parts. Close contact may cause electrical shock,
entanglement, burns and other serious injury. Protective equip-
ment may be required.
If you have any question concerning this Ridge Tool product:
• Contact your local RIDGID distributor.
• Visit www.RIDGID.com to find your local Ridge Tool contact point.
• Contact Ridge Tool Technical Service Department at rtctechser-
vices@emerson.com, or in the U.S. and Canada call (800) 519-
3456.
Description, Specifications
And Standard Equipment
Description
®
The RIDGID
®
micro IR-200 Non-Contact Infrared Thermometer pro-
vides simple, quick, and accurate surface temperature readings at
the push of a button. You simply squeeze the trigger and point the
ultra-sharp dual class II lasers at the surface being measured. The
micro IR-200 provides an immediate temperature measurement on
a clear, easy-to-read backlit LCD display. In addition to numerous
other uses, this rugged, compact instrument enables professional
tradesman to diagnose heating and ventilation problems, perform
preventative monitoring of electrical motors and systems, trou-
bleshoot steam traps and quickly check fuses or circuit breakers for
overheating without contact.
The micro IR-200 uses optics to sense emitted, reflected and trans-
mitted energy, which is collected and focused onto a detector. The
unit's electronics translate the information into a temperature read-
ing, which is displayed. Lasers are used to assist in aiming.
999-995-066.10_REV. D

Publicidad

Tabla de contenido
loading

Tabla de contenido