Bosch MIC Hinged DCA MIC-DCA-H Serie Guía De Instalación Rápida página 6

en | Install a MIC7000 Camera on a Hinged DCA
6
Additional Tools Required
1 Torx driver, T25, to loosen and tighten the hook bolts
1 Wrench/driver to secure M8 bolts (supplied) to mount the
camera onto the DCA
1 Wrench/driver to secure user-supplied bolts (maximum M8
or 5/16" diameter) to mount the DCA to the mounting
location
1 Phillips-head screwdriver to attach ground wire
* * (Optional) MOLYKOTE® 111 grease [from Dow Corning] for
primary O-ring
Warning!
Ensure not to damage the paint on the housing of the
!
camera or the mount.
2014.08 | 1.2 | F.01U.306.505
MIC Hinged DCA
Bosch Security Systems