Care And Cleaning - Hamilton Beach FlexBrew 49960 Manual Del Usuario

Ocultar thumbs Ver también para FlexBrew 49960:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Care and Cleaning

All coffeemakers should be cleaned at least once a month
(once a week for areas with hard water).
1
4
Routine Cleaning of the Needle: The needle is located in the lid of the coffeemaker. Bend a small paper clip
as shown; insert the tip of the paper clip through the hole/eye of the needle and up into the needle to ensure
grounds have been removed. Brew 2 or 3 times with cold water to make sure grounds have been removed
from the piercing needle.
8
840239403 ENv02.indd 8
840239403 ENv02.indd 8
2
5
w WARNING
Shock Hazard.
Do not immerse cord, plug, or coffeemaker in any liquid.
Cut Hazard.
w CAUTION
Removable single-serve pack holder has a sharp blade. Piercing
needle on underside of lid also is sharp. Use caution when handling.
Pour 3/4 cup (177 ml) of plain white
vinegar and 3/4 cup (177 ml) of
cold water into reservoir. Place a
14-oz. (414 ml) cup or travel mug
underneath to catch the water/vinegar
solution. Press the REGULAR or BOLD
button once. After 30 seconds,
unplug unit and allow vinegar to
clean. After 30 minutes, plug in unit.
Press REGULAR button and allow it
to finish the brew cycle. When brew
cycle is finished, wait for unit to cool.
Empty cup and rinse. Run 2 to 3
cycles of cold tap water. The unit is
cleaned and ready to make coffee.
6
3
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product.
1/16/15 11:27 AM
1/16/15 11:27 AM

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Flexbrew 49997Flexbrew 49997c

Tabla de contenido