Care And Cleaning - Hamilton Beach FlexBrew 49988 Manual De Instrucciones

Care and Cleaning

1
Routine Cleaning of the Needle: The needle is located in the lid of the coffee maker. Bend a small paper clip
as shown; insert the tip of the paper clip through the hole/eye of the needle and up into the needle to ensure
grounds have been removed. Brew 2 or 3 times with cold water to make sure grounds have been removed
from the piercing needle.
4
Pour 3/4 cup (177 ml) of plain white vinegar and 3/4 cup (177 ml) of cold water into reservoir. Place a 14-oz. (414 ml) cup
or travel mug underneath to catch the water/vinegar solution. Press the I/O (ON/OFF) button once. After 30 seconds,
unplug unit and allow vinegar to clean. After 30 minutes, plug in unit. Press I/O (ON/OFF) button and allow it to finish the
brew cycle. When brew cycle is finished, wait for unit to cool. Empty cup and rinse. Run 2 to 3 cycles of cold tap water.
The unit is cleaned and ready to make coffee.
2
5
All coffee makers should be cleaned at least once a month
(once a week for areas with hard water).
3
6
Shock Hazard.
w WARNING
Do not immerse cord, plug, or
coffee maker in any liquid.
w CAUTION Cut Hazard.
Use caution when handling:
• Removable single-serve pack
holder has a sharp blade.
• Piercing needle on the
underside of the lid is sharp.
DISHWASHER-SAFE
DO NOT use the "SANI" setting
when washing in the dishwasher.
"SANI" cycle temperatures could
damage your product.
11