Klarstein New Breeze 7 Manual Del Usuario página 35

3 +/- Keys
Temperature setting: If you press [+] or [-], the set temperature will be increased or
decreased by 1 ° C (or 1 ° F). Hold the button down. After 2 seconds, the set time on
the remote control will change. Release the button after the desired time value has been
reached. The display will change accordingly. The temperature cannot be set in auto
mode.
Timer on / off or setting the time: press +/- to set the time (see TIMER).
4 FAN
Press to set the fan speed in these steps: automatic, low, medium, high.
Auto
Note: In automatic mode, the fan automatically adjusts the level depending on the
ambient temperature. In dehumidification mode, the fan runs at a low temperature.
5 Swivel movement up / down
Swiveling movement up / down. The settings appear in the following order: if you
press on the remote control, the pan movement is automatically set. The horizontal
slats in the air conditioning system automatically move up and down at the greatest
possible angle.
No display
When you select
position. The horizontal slats will stop in the position as indicated in the symbol.
on the remote control, you set a fixed pan
EN
35