Descargar Imprimir esta página

KTM Power Parts SXS10450512 Manual De Usuario página 4

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

1
3
4
2
3
2
4
Scope of delivery:
1x titanium main silencer with Sparky insert
1x exhaust spring
Main silencer fixation
- Remove the standard main silencer (see Owner's Manual).
- Mount the rubber piece (1), large bushings (2) and small bushings (3) of
the original main silencer.
NOTE:
Mount the small bushings (3) on the inside of the main silencer.
- Position the Akrapovic slip-on main silencer and attach it using the origi-
nal screws.
- Attach the exhaust spring (4) (included).
Set up the entire exhaust system and tighten all fixing screws.
When using the main silencer for the first time, the engine rpm must be kept
low for roughly the first 5 minutes to evenly heat the main silencer. This is
the only way to ensure that the rock wool will be fully effective and will keep
the volume down to the required level.
Maintenance
The rock wool of the main silencer must be replaced every 15 hours during
competitive riding and every 30 hours during hobby riding. (For rock wool
kit, see spare parts kit.)
Spare parts:
Rock wool kit
Titanium silencer cap
Spark arrester insert
Akrapovic for titanium sticker
Exhaust spring
57305016100
SXS10450517
SXS10450514
SXS07250518
SXS07540509
57305016100

Publicidad

loading