Wireless Control With Dmx Products - Chauvet FlareCON Air Guía De Referencia Rápida

FlareCON Air QRG
Wireless Control
with DMX Products
www.liveline.be
When using FlareCON Air to wirelessly send D-Fi signals while using DMX
lights that have no D-Fi capability, FlareCON Air must be used with a
D-Fi Hub. The FlareCON Air creates a wireless network (Wi-Fi™) for receiving
the signals from the mobile device, and sends D-Fi signals wirelessly to the D-Fi
Hub. D-Fi Hub then converts those signals to DMX and sends those signals
through a DMX cable to the DMX lights.
Mobile Device sends
Wi-Fi™ Signal to
FlareCON™ Air
FlareCON app on
Tablet or Smartphone
Be sure to connect only one smartphone or tablet at a time.
The tablet or smartphone running FlareCON app should be within 100
•
feet (30.5 m) of FlareCON Air.
Always install FlareCON Air within 600 ft (183 m) of the products
•
receiving D-Fi. FlareCON Air works best within the line of sight of the D-
Fi products.
For information about configuring a product to receive D-Fi or wireless
DMX signals, see the User Manual for that product. User Manuals for
CHAUVET products are available from the Chauvet website at
http://www.chauvetdj.com/.
FlareCON Air
D-Fi Hub sends DMX
Signal to
DMX-compatible
Product via Cable
7
EN
FlareCON Air sends
D-Fi Signal to
D-Fi Hub
D-Fi Hub