16. You can now connect your wireless network adapter(s) to the EM4591 as
described in chapter 'Connecting a wireless WPS adapter to the EM4591', or by
connecting to the Wi-Fi connection and entering the wireless encryption key of the
wireless network you previously connected.
5.2 Manual configuration (Tablet/Smartphone)
1. Connect the EM4591 to a wall outlet.
2. Wait for the signal indicator to flash green.
3. Connect to the EM4591 via WiFi SSID: Eminent_repeater.
4. The device will launch the internet browser automatically and open the EM4591
User Interface (If in any case it doesn't, open your devices browser and type
http://10.0.10.254 in the address bar.
5. If you configure the device the first time you will see a pop-up screen displaying all
the available WiFi networks (see picture below). If not continue to step 8
11 |
ENGLISH