Listening To Mono Recordings - Belkin TuneCast Auto Manual De Usuario

Using the TuneCast Auto

Listening to Mono Recordings

Your TuneCast Auto transmits in stereo, but you can also transmit in mono if needed. We suggest
that you switch to mono transmission only if your car stereo is not receiving a clear signal from the
TuneCast Auto or if you are listening to a mono recording such as an audio book.
To switch to mono transmission, press the "PRO" button until is shown on the
display. The "PRO" button settings are as follows:
Charging Your iPod
Your TuneCast Auto will charge your iPod while it is connected to a power outlet and
receiving power. If your iPod is not charging, make sure your TuneCast Auto is correctly
connected to the power outlet and that your iPod is securely connected to your TuneCast
Auto. The indicator light on the cigarette lighter adapter should be lit.
Note: Some vehicles do not provide power to the power outlet unless the vehicle is in
ignition mode or the engine is running.
Using the TuneCast Auto
| EN-5
P75616ea_F8Z182eaBLK_TuneCast_mnl.indb 5 14/01/2008 16:46:07