Speedaire 26X359 Manual Del Usuario página 5

Periodic Maintenance Procedure 26X361 and 26X362
Part Name
Filter Element
Diaphragm with Holder
Valve Box with Valve
Nu t
Washer
Magnet Support Fixture
Fig. 1
Filter Cover
Fig. 2
Overall Cover
Fig. 3
Bolt
Nut
Fig. 4
Screw (B)
Shock Absorber
Qty
1
2
2
2
2
4
Truss Head Screw
Filter Element
Holder Cover
Always disconnect the power before servicing. Failure to
do so could result in electrical shock, personal injury or
death.
Clean the filter element quarterly. A clogged filter
element can cause overheating or pump failure.
1. Filter Element Cleaning:
 Undo the truss head screw and remove the
filter cover
(Ref.: Fig.1).
Note: Truss head screw is not present on some
models.
 Remove the filter element and shake out
the dust by hand
(Ref.: Fig.2). If it is heavily clogged, wash it with a
neutral detergent. Rinse with water and dry it in the
shade.
 Reassemble the filter element back in
place and press in the filter cover.
 Fix the filter cover by the truss head
screw.
2. Diaphragm Inspection:
 Undo the four corner bolts and remove the
overall cover. In case the overall cover is
hard to remove, insert a slotted
screwdriver in (A). (Ref: Fig 3)
 Remove the shock absorber. Undo the
screws (B) and remove the holder cover.
(Ref: Fig 4)
Note: Holder cover is not present on some
models.