PEERLESS Paramount PFT640 Instalación Y Montaje página 8

For Flat Back Screen
2-3
If you have any questions, please call Peerless customer care at 1-800-865-2112 or visit our website at
www.peerlessmounts.com/1 for PFT640 models or www.peerlessmounts.com/6 for PFT660 models, to
your screen compatibility chart.
Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into screen as shown
below. Screw must make at least three full turns into the mounting hole and fit snug into place. Do not over tighten.
If screw cannot make three full turns into the screen, select a longer length screw from the baffled fastener pack.
Repeat for remaining mounting holes, level brackets and tighten screws.
NOTE: Spacers may not be used, depending upon the type of screen.
If you have any questions, please call Peerless customer care at 1-800-865-2112.
For Bump-out or Recessed Back Screen
2-4 If you have any questions, please call Peerless customer care at 1-800-865-2112 or visit our website at
www.peerlessmounts.com/1 for PFT640 models or www.peerlessmounts.com/6 for PFT660 models, to
your screen compatibility chart.
Begin with longer length screw, hand thread through multi-washer, adapter bracket and spacer in that order into
screen as shown below. Screw must make at least three full turns into the mounting hole and fit snug into place.
Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the
baffled fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.
If you have any questions, please call Peerless customer care at 1-800-865-2112.
SCREEN
MULTI-WASHER
ADAPTER BRACKET (B)
SCREEN
MULTI-WASHER
SPACER
8 of 27
fig. 2.3
SCREW
fig. 2.4
SCREW
ADAPTER BRACKET (B)
ISSUED: 05-17-07 SHEET #: 202-9208-3 5-7-08
locate
locate