Optional Functions - Vertilux VTi 6-710-SP-00400 Manual De Programación

Optional functions

• Modifiying the direction of the panels
•
Adding an additional remote control
•
Resetting the motor to factory default
Modifiying the direction of the panels
This function is convenient when the need arises to change the moving direction of the panels.
For example, when pressing the
pressing the down button, the shade opens.
1. Press and hold the
wall control at the same time until the blue light
on the wall control flashes.
Adding an additional remote control
A wall control can also be used in order to add a new remote control.
1. Using the wall control, press and hold the
button for about 5 s until the blue light on the
wall control flashes.
2. Then, using the new remote control, select the
desired channel using the
button, and press the
Shade is now set on the new remote control.
vertilux.com
4
© 2018. Vertilux, Ltd. All Rights Reserved. Last revised: October 2018.
up button on the wall control, the shade closes, or when
up and down buttons on the
channel selector
up button. The Vertilux
stop
NEW REMOTE
CONTROL
UP & DOWN
BUTTONS
STOP
BUTTON
UP
BUTTON