Kohler K-8013 Guía De Instalación Y Cuidado página 4

Install the Plaster Guard
Elbow (or Tee)
Install the
plaster guard.
2. Install the Plaster Guard
Install the plaster guard. Push until the plaster guard is snug
against the face of the elbow (or tee).
3. Set the Pipe Depth
Thin Wall Installations
NOTE: Thin wall installations have a finished wall thickness of less
than 3/8" (10 mm).
To adjust the pipe depth, use a level or other straight edge to line
up the "Thin Wall Installation" mark with the front face of the
studs.
Standard Wall Installations
To adjust the pipe depth, use a level or other straight edge to line
up the edge of the plaster guard with the front face of the studs.
All Installations
Install appropriate backing and strap the pipes at the adjusted
depth.
1080947-2-D
Set Piping Depth
Thin Wall
Align mark with the
front of the stud face.
Standard Wall
Align mark with the
front of the stud face.
4 Kohler Co.