Proper Use; Selecting Temperature; Temperature Settings - Beurer HK 55 Easyfix Instrucciones Para El Uso

• This heating pad must be checked frequently for signs of wear or damage. If such signs are present, or if the
cables are damaged, or if this heating pad has been used incorrectly, it must be taken to either the manu-
facturer or the dealer before further use.
• Repairs may only be carried out by specially trained personnel or at an authorised repair workshop, as special
tools are required. Incorrect repairs may cause considerable danger to the user.
• Should you still have questions on using our appliances, please contact our customer service.

2. Proper Use

This heating pad is designed for warming the human body. It allows you to apply targeted warmth. Heat
promotes the circulation and relaxes the muscles. This heating pad is not intended for use in hospitals or for
commercial applications. In particular, it may not be used on infants, small children, persons insensitive to heat,
helpless persons or animals.
This heating pad is made of breathable velour and is very adaptable and agreeable to the skin.
The detachable switch allows the pad to be cleaned in the washing machine (see cleaning instructions).
When used for the first time, the heating pad may start to smell of plastic but this will soon go away.
This heating pad can be used all purposes, for example, on the stomach, back, joints or neck. If used for the
neck area, the heating pad can be rolled up.
The pull-out Velcro fastenings make it very easy to fasten to the body. The elastic ensures that the heat is
always positioned optimally.
3. Operation
3.1 Safety
This heating pad has a SAFETY SYSTEM. This electronic sensor technology prevents the entire surface of the
heating pad from overheating by automatically switching off in the event of a fault. If the safety system switches
off the heating pad automatically as a result of a fault, the indicator lamp is no longer illuminated even when
the heating pad is switched on. Please note that, after a fault has occurred, the heating pad can no longer be
used for safety reasons and must be sent to the service address indicated.

3.2 Selecting temperature

The fastest way to heat up the heating pad is to first set the switch to the highest setting. A lower setting can
be selected later if required.
After switching on the heating pad, the setting starts flashing briefly, while the heating pad conducts a self-test.
Then the setting remains illuminated continuously.

3.3 Temperature settings

Setting: 0 Off
1 Minimum heat
2 Medium heat
3 Maximum heat
3.4 Automatic switch-off function
These heating pads have an automatic switchoff function which stops the heat supply approx.
90 minutes after switching on the pad. The illuminated function display then starts to flash. To
operate the heating pad again, you must first set the switch to zero. After about 5 seconds, it
can be switched on again.
If the heating pad is no longer used after the timed switch-off, it should be switched off (setting
"0") or else unplugged from the mains.
3.5 Fast heating
These heating pads have a fast heating function which allows them to heat up quickly within
the first 10 minutes.
7
90
min
STOP
TURBO