Beninca PR.4WBP Manual De Instrucciones página 9

The four keys of a four channel transmitter are automatically associated, each one to the cor-
responding channel. (Key1:ch1, key2:ch2, key3:ch2 and key4:ch4).
FIX
Press, within 5 seconds, any key of a four channel transmitter.
Synchronism control is activated (see Synchronism paragraph).
add
A key code to protect functions of the radio menu is created.
Type a 4-digit number by pressing + and - keys to increase/decrease the number. Keep the
key pressed to accelerate increase/decrease-
key
To confirm the desired value, press OK.
Important note: take note of the typed-in code and keep it carefully.
Menu to erase previously typed in transmitter codes from memory.
The single submenus are described hereunder:
The receiver is in a waiting mode, waiting for a memorized transmitter key to be pressed.
code
The transmitter is erased from the receiver memory.
DEL
Remove a control unit code for which the position in memory is know, see function Find>Code
indh
It erases the key code from memory to gain access to all functions of the radio menu.
key
The receiver memory is completely erased. All transmitter codes and relevant associations and channel
parameters are cancelled.
res
A confirmation of the operation is being asked.
Search Menu for transmitter codes stored in memory.
The single submenus are described hereunder:
La ricevente si pone in attesa di un codice, premere un pulsante del trasmettitore, se presente
find
Code
visualizza la posizione in memoria.
N Tx The number of transmitter codes stored in the receiver memory is displayed.
9