HP Color LaserJet Pro MFP M176 Guía De Inicio página 5

Ocultar thumbs Ver también para Color LaserJet Pro MFP M176:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Troubleshooting
User Guide
The User Guide includes printer usage and troubleshooting information. It is
available on the printer CD and on the Web:
1.
Go to
www.hp.com/support/ljMFPM176series
www.hp.com/support/ljMFPM177series.
2.
Select a printer or category from the list, and then click User guides.
For Windows, the User Guide is copied to the computer during the recommended
software installation.
Windows
XP, Windows Vista
®
Click Start, select Programs or All Programs, select HP, select the folder for
the HP printer, and then select Help.
Windows
8
®
On the Start screen, right-click an empty area on the screen, click All Apps on
the app bar, click the icon with the printer's name, and then select HP Help &
Learn Center.
Check for firmware updates
1.
Go to
www.hp.com/support/ljMFPM176series
www.hp.com/support/ljMFPM177series.
2.
Click Drivers, select the operating system, and click the Next button.
3.
Select Firmware, and click the Download button.
Wired (Ethernet) network connection
• Verify that the printer is attached to the correct network port using a cable of
the correct length.
• Verify the lights next to the network port are lit.
• Verify the print driver is installed on the computer.
• Test the network connection by pinging the network:
Windows
Click Start > Run. Type cmd, and press Enter. Type ping,
type a space, type the printer IP address, and then press Enter.
Example IP address: 192.168.0.1
OS X
Open the Network Utility, and type the IP address in the ping pane. Press Enter.
Example IP address: 192.168.0.1
• If the window displays round-trip times, the network is working.
• If the ping does not work, try restarting the printer and recheck all of the
connection steps.
Fax troubleshooting (M177fw model only)
Verify the physical connection
• Verify that the phone cord is connected to the fax
printer and to the wall jack.
• For an extension phone or other additional device, verify the phone cord is
connected to the telephone
• If outgoing phone calls fail because no dial tone is detected or the line is busy,
connect to a different phone line.
• For Fax over IP service, reduce the fax speed and turn off Error Correction Mode
from the Fax Settings menu on the printer control panel.
or
, and Windows
7
®
®
or
port on the back of the
port on the back of the printer and to the device.
Control panel help (M177fw wireless model only)
Touch the Help
button on the printer control panel to access help topics.
Additional support resources
Go to
www.hp.com/support/ljMFPM176series
www.hp.com/support/ljMFPM177series
printer:
• Solve problems
• Find advanced configuration instructions
• Download software updates
• Join support forums
• Find warranty and regulatory information
• Mobile printing resources
Wireless network connection
• Verify that the network cable is not connected. The printer cannot connect to a
wireless network when a network cable is connected.
• Verify that the printer and wireless router are turned on and have power. Also
make sure the wireless switch is turned on.
• Verify that the printer is within the range of the wireless network. For most
networks, the printer must be within 30 m (100 ft) of the wireless access point
(wireless router).
• Verify the print driver is installed on the computer.
• Verify that the computer and printer connect to the same wireless network.
• For Mac, verify that the wireless router supports Bonjour.
• Restart the wireless router.
Perform the wireless diagnostic test
1.
From the Home screen on the printer control panel, touch the
Setup
button.
2.
Select Self Diagnostics, and then select Run Network Test
Verify the printer fax settings
• To use a voice-mail service from the phone company or service provider, make
sure that the printer Rings to Answer setting is set to be fewer rings than the
telephone answering machine.
• If multiple phone numbers are assigned to the same physical phone line and
the line is shared by multiple devices, make sure that the printer is set to the
correct distinctive ring setting. Use a setting in which the printer answers faxes
and ignores other ring types.
• Configuring the Fax Speed setting to Medium (V.17) or Slow (V.29) can also
improve your ability to send a fax.
Perform the fax diagnostic test
1.
From the Home screen on the printer control panel, touch the
Setup
button.
2.
Select Self Diagnostics, and then select Run Fax Test.
5
or
for HP's all inclusive help for the
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Color laserjet pro mfp m177

Tabla de contenido