Samsung WF231 Serie Manual Del Usuario página 31

For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
WF231ANW-02832D_EN.indd Sec10:31 WF231ANW-02832D_EN.indd Sec10:31
A fault is detected in the water
level sensor.
Jammed Key.
Motor speed sensor problem.
Temperature sensor problem.
High current detected.
High/Low voltage detected.
Too many suds are detected
during the washing session.
The unit is put on hold until the
suds are reduced. Then, the unit
will go back to the operation.
When it fi nishes washing, End and
Sd codes will blink in turn.
Call for service
Call for service
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
Restart the cycle.
If the code reappears, call for service.
To prevent, reduce the amount of detergent.
troubleshooting and information codes _31
2011-04-18 2011-04-18 10:38:32 10:38:32