Description; Before First Use; Using The Appliance; Use - Krups ZB500E Guia De Inicio Rapido

KR_SLOW-JUICER_2643682_MISE EN PAGE 02/05/13 12:17 Page7
Polarization Plug
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical
shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way.

DESCRIPTION

A Pusher
B 3 part feed tube
C Pressing screw
D Juice filter
E Coulis filter
F Residue strap (not separable from the filter)
G Bowl
H Juice collector
I
Spout with drip-stop system

BEFORE FIRST USE

Unpack the appliance and place it on a horizontal, solid and stable work-top, then take it apart completely.
Make sure that you have removed all packaging before you start using the appliance.
Wash all the removable parts, rinse them out and dry them carefully: the pusher (A), the feed tube (B),
the pressing screw (C), the filters (D and E), the residue strap (F), the bowl (G), the juice collector and
the spout with drip-stop (H and I), and the jugs (N).
USING THE APPLIANCE FIG. 1 TO 7
Assemble the appliance as indicated on the drawings and choose the filter according to the desired
preparation:
Juice filter (D – orange colour) with small holes to make juices.
Coulis filter (E – raspberry colour) with wider holes to make thicker preparations, like coulis.
During the assembly, make sure that the residue strap is correctly positioned on the filter (fig.1).

USE

Before use, wash all pre-treated food products carefully.
Prepare the full amount of ingredients to be pressed. Most fruit and vegetables do not require peeling or
deseeding. Peel only those with thick skin (citrus fruits, bananas, pineapple, melon, passion fruit...).
Remove the stones (in peaches, apricots, mangoes...) and the hard cores of pineapples.
Cut up fruit and vegetables that are too large to fit through the feed tubes.
Never put fruit stones, excessively hard foods (ice cubes, sugar cubes), extremely fibrous foods, or meat
into your juicer.
Place one jug (N) under the spout (I) and the other jug (N) under the residue exit (K) to collect the pulp
(fig. 8). Remember to empty the jug under the residue exit when it is full.
Press the Start/Stop button (M) to turn on the appliance, place the food in the feed tubes (B) and push
them down using the pusher (A). Make sure that the spout (I) is in the "low" position (juice flow).
The fruit and vegetables must only be inserted while the motor is running.
Never use your fingers or other utensils to push food through the spout.
Do not press too hard on the pusher (A).
Once the ingredients have passed through, let the appliance turn for a few more seconds in order to
obtain the maximum amount of juice.
J Juice exit
K Residue exit
L Motor unit
M Start/Stop button
N Jugs (one to collect residue and one to collect
juice)
O Foam separator
P Cleaning brush
English
7