auna 10031949 Manual De Instrucciones página 34

EN
34
Secondary Services
You may see a " > " symbol after the name of the station, this indicates that
there are secondary services available to that station. These secondary
services contain extra services that are related to the primary station. e.g. a
sports station may want to add extra commentaries. The secondary services
are inserted directly after theprimary station in the station list.
To select the secondary station, press the MENU button when the ">"
appears in the display before the station name. When the secondary service
ends, the unit will automatically switch back to the primary station.
Preset Stations
(Remote Control Only)
1 Press and hold the MEMORY button. The display will show "<Save to
P#>".
2 Press the PRESET UP or DOWN buttons to select your desired preset
station number. Then press the ENTER button confirm.
3 The station will be stored in few seconds and the display will then show
"Preset #Stored".
Recalling a Stored Station
(Remote Control Only)
1 Once you have saved a station to one of the preset buttons, you can
recall it by pressing the MEMORY button.
2 Press the PRESET UP or DOWN buttons until your desired station show
on the display.
DAB Display Modes
Press the INFO button on the remote control, the display will switch through
the following display modes. The information of each display mode is
displayed on the lower segment of the display.
Signal Strength
The display will show a slide bar to indicate the signal strength, the stronger
the signal, the longer the bar will be from left to right.