Audio Mode
Press the MONO/STEREO button on the remote control to toggle between
the Stereo or Mono modes.
Preset Stations
You can store up to 20 of your favourite stations to the memory. This will
enable you to access your favourite stations quickly and easily.
1
To store a preset, you must first be listening to the station that you
would like to save, press and hold the MEMORY button. The display will
show "Save to P#".
2
Press the PRESET buttons to select your desired preset station number.
Then press the ENTER button confirm.
3
The station will be stored in few seconds and the display will then show
"Preset #Stored".
Recalling a Stored Station
1
Once you have saved a station to one of the preset buttons, you can
recall it by pressing the MEMORY button.
2
Press the PRESET buttons until your desired station show on the
display; Then press the ENTER button confirm.
FM Display Modes
Press the DISPLAY button on the remote control, the display will switch
through the following display modes.The information of each display mode
is displayed on the lower segment of the display.
Radio Text
As with DAB, the broadcaster can include a scrolling text that displays
information about the current program.
EN
37